*

COATING PRODUCT DESCRIPTIONS

FLEX SPRAY SEALANT¨ Ultra fast curing plural component polyurea spray, cures in 15 seconds, chemical and UV resistant, great physical properties 

PolyArmor Pro (TM): Polyurea Coating

Applied to steel, wood, concrete, masonry as specified by product specification sheet. When applied to properly prepared surface, this product can offer a colorfast chemical resistant and tough, long-lasting surface coating. Easily maintained, repaired and recoated, its greatest feature is the fast cure time, tack free in 12 minutes -- (4) hours in most cases, ready for recoat or use within (8) hours. Great color selection! 

Lap Prep (TM): Coated Surface Cleaner and Activator

Applied to properly adhered, previously coated surface such as polyurea, urethane, epoxy, polyurethane. 

(Always test Lap Prep (TM) in a small out of the way area for proper material match and performance, consult your representative before utilizing on previously coated surface for proper cleaning procedures.) This product will setup some existing coatings to receive a recoat or new coating without extensive preparation. 

Primers:

ReNew® System has performed extensive testing in both preparation and coating and we have developed and discovered primers which vary per surface requirements to help promote adhesion and provide rust inhibitors. Consult your representative for proper primer in your application.